| |
Accounting (ACC) |
| |
-
ACC 124 - Payroll Accounting
(3 credits) Presents accounting systems and methods used in computing and recording payroll to include payroll taxes and compliance with federal and state legislation.
Corequisite(s): ACC 211 .
Lecture: 3 hours per week
|
| |
-
ACC 211 - Principles of Accounting I
(3 credits) Introduces accounting principles with respect to financial reporting. Demonstrates how decision makers use accounting information for reporting purposes. Focuses on the preparation of accounting information and its use in the operation of organizations, as well as methods of analysis and interpretation of accounting information.
Prerequisite(s): ENF 1 or ENF 2 and MTE 1-3 as demonstrated through the placement and diagnostics tests or equivalent.
Lecture: 3 hours per week
|
| |
-
ACC 212 - Principles of Accounting II
(3 credits) Introduces accounting principles with respect to cost and managerial accounting. Focuses on the application of accounting information with respect to product costing, as well as its use within the organization to provide direction and to judge performance.
Prerequisite(s): ACC 211 with a grade of “C” or better.
Lecture: 3 hours per week
|
| |
-
ACC 215 - Computerized Accounting
(3 credits) Introduces the computer in solving accounting problems. Focuses on operation of computers. Presents the accounting cycle and financial statement preparation in a computerized system and other applications for financial and managerial accounting.
Prerequisite(s): ACC 211 or equivalent.
Lecture: 3 hours per week
|
| |
-
ACC 221 - Intermediate Accounting I
(3 credits) Covers accounting principles and theory, including a review of the accounting cycle and accounting for current assets, current liabilities and investments. Introduces various accounting approaches and demonstrates the effect of these approaches on the financial statement users.
Prerequisite(s): ACC 212 or equivalent.
Lecture: 3 hours per week
|
| |
-
ACC 222 - Intermediate Accounting II
(3 credits) Continues accounting principles and theory with emphasis on accounting for fixed assets, intangibles, corporate capital structure, long-term liabilities, and investments.
Prerequisite(s): ACC 221 or equivalent.
Lecture: 3 hours per week
|
| |
-
ACC 240 - Fraud Examination
(3 credits) Covers the principles and methodology of fraud detection and deterrence. Provides an introduction to the various ways fraud and occupational abuses occur, methods to identify the risk of exposure to loss from fraud, and appropriate prevention, detection, and investigation approaches.
Lecture: 3 hours per week
|
| |
-
ACC 261 - Principles of Federal Taxation I
(3 credits) Presents the study of federal taxation as it relates to individuals and related entities. Includes tax planning, compliance, and reporting.
Prerequisite(s): ENF 1 or ENF 2 as demonstrated through the placement and diagnostics tests or equivalent.
Lecture: 3 hours per week
|
| |
-
ACC 262 - Principles of Federal Taxation II
(3 credits) Presents the study of federal taxation as it relates to partnerships, corporations, and other tax entities. Includes tax planning, compliance, and reporting.
Prerequisite(s): ACC 261 or consent of instructor.
Lecture: 3 hours per week
|
| |
-
ACC 263 - Data Analytics and Statistics in Accounting
(3 credits) Introduces the field of business analytics in accounting, finance, and business management. Focuses on the way in which enterprises such as corporations, non-profits, and governments can use data to gain insights and make better decisions. Presents the application of selected data mining techniques to support business analytics.
Prerequisite(s): ACC 212
Lecture: 3 hours per week
|
| |
-
ACC 264 - The Role of Accounting in Business and Society
(3 credits) Presents a comprehensive view of the role and relevance of accounting in business and society, by public and private sector organizations. Focuses on information needs for external reporting to investors and creditors, internal management planning and control decisions, assessment of risks and internal controls, and regulatory oversight.
Prerequisite(s): ACC 212
Lecture: 3 hours per week
|
| |
-
ACC 275 - Capstone Seminar in Accounting
(3 credits) Integrates knowledge in financial accounting, managerial/cost accounting, computer techniques, business ethics, general ledger, and communication skills in preparing a professional student portfolio. Provides a learning experience that allows the student to apply broad knowledge of the accounting profession through discipline specific projects; involves the integration of individual and team activities to simulate workplace situations.
Prerequisite(s): ACC 211 , ACC 212 , ACC 221 , Corequisite(s): ACC 222 or appropriate accounting experience and consent of instructor.
Lecture: 3 hours per week
|
| |
|
Administration of Justice (ADJ) |
| |
-
ADJ 100 - Survey of Criminal Justice
(3 credits) Presents an overview of the United States criminal justice system; introduces the major system components-law enforcement judiciary, and corrections.
Prerequisite(s): ENF 1 or ENF 2 as demonstrated through the placement and diagnostics tests or equivalent or departmental approval.
Lecture: 3 hours per week
|
| |
-
ADJ 105 - The Juvenile Justice System
(3 credits) Presents the evolution, philosophy, structures, and processes of the American juvenile delinquency system; surveys the rights of juveniles, dispositional alternatives, rehabilitation methods and current trends.
Lecture: 3 hours per week
|
| |
-
ADJ 116 - Special Enforcement Topics
(3 credits) Considers contemporary issues, problems, and controversies in modern law enforcement.
Lecture: 3 hours per week
|
| |
-
ADJ 118 - Crisis Intervention and Critical Issues
(3 credits) Addresses basic problems involved in crisis intervention and current critical issues in law enforcement and the administration of justice; emphasizes practical approaches to discover and implement solutions.
Lecture: 3 hours per week
|
| |
-
ADJ 127 - Firearms and Marksmanship
(3 credits) Surveys lethal weapons in current use and current views on weapon types and ammunition design. Examines the legal guidelines as to use of deadly force, safety in handling of weaponry, and weapon care and cleaning; marksmanship instruction under standard range conditions.
Lecture: 2 hours
Lab: 3 hours
Total: 5 hours per week
|
| |
-
ADJ 131 - Legal Evidence I
(3 credits) Surveys the identification, degrees, and admissibility of evidence for criminal prosecution; examines pre-trial and trial procedures as they pertain to the rules of evidence.
Lecture: 3 hours per week
|
| |
-
ADJ 140 - Introduction to Corrections
(3 credits) Focuses on societal responses to the offender. Traces the evolution of practices based on philosophies of retribution, deterrence, and rehabilitation. Reviews contemporary correctional activities and their relationships to other aspects of the criminal justice system.
Lecture: 3 hours per week
|
| |
-
ADJ 145 - Corrections and the Community
(3 credits) Studies and evaluates the relationships and interactions between correctional organizations and free society. Focuses on the shared responsibility of the community and corrections agencies to develop effective programs for management and treatment of criminal offenders.
Lecture: 3 hours per week
|
| |
-
ADJ 171 - Forensic Science I
(3 credits) Introduces students to crime scene technology, procedures for sketching, diagramming and using casting materials. Surveys the concepts of forensic chemistry, fingerprint classification/identification and latent techniques, drug identification, hair and fiber evidence, death investigation techniques, thin-layer chromatographic methods, and arson materials examination.
Lecture: 3 hours per week
|
| |
-
ADJ 172 - Forensic Science II
(3 credits) Introduces students to crime scene technology, procedures for sketching, diagramming and using casting materials. Surveys the concepts of forensic chemistry, fingerprint classification/identification and latent techniques, drug identification, hair and fiber evidence, death investigation techniques, thin-layer chromatographic methods, and arson materials examination.
Prerequisite(s): ADJ 171 .
Lecture: 3 hours per week
|
| |
-
ADJ 201 - Criminology
(3 credits) Studies current and historical data pertaining to criminal and other deviant behavior. Examines theories that explain crime and criminal behavior in human society.
Lecture: 3 hours per week
|
| |
-
ADJ 211 - Criminal Law, Evidence & Procedures I
(3 credits) Teaches the elements of proof for major and common crimes and the legal classification of offenses. Studies the kinds, degrees, and admissibility of evidence and its presentation in criminal proceedings, with emphasis on legal guidelines for methods and techniques of evidence acquisition. Surveys the procedural requirements from arrest to final disposition in the various American court systems, with focus on the Virginia jurisdiction.
Lecture: 3 hours per week
|
| |
-
ADJ 229 - Law Enforcement and the Community
(3 credits) Considers current efforts by law enforcement personnel to achieve an effective working relationship with the community. Surveys and analyzes various interactive approaches of law enforcement agencies and the citizenry they serve.
Lecture: 3 hours per week
|
| |
-
ADJ 234 - Terrorism and Counter-Terrorism
(3 credits) Surveys the historical and current practices of Terrorism that are national, transnational, or domestic in origin. Includes biological, chemical, nuclear, and cyber-terrorism. Teaches the identification and classification of terrorist organizations, violent political groups and issue-oriented militant movements. Examines investigative methods and procedures utilized in counter terrorist efforts domestically and internationally.
Lecture: 3 hours per week
|
| |
-
ADJ 236 - Principles of Criminal Investigation
(3 credits) Surveys the fundamentals of criminal investigation procedures and techniques. Examines crime scene search for the collecting, handling, and preserving of evidence.
Lecture: 3 hours per week
|
| |
-
ADJ 247 - Criminal Behavior
(3 credits) Introduces and evaluates the concepts of normal and abnormal behavior. Focuses on the psychological and sociological aspects of criminal and other deviant behavior patterns.
Lecture: 3 hours per week
|
| |
|
Administrative Support Technology (AST) |
| |
-
AST 101 - Keyboarding I
(3 credits) Must be taken in sequence. Teaches the alpha/numeric keyboard with emphasis on correct techniques, speed, and accuracy. Teaches formatting of basic personal and business correspondence, reports and tabulation.
Lecture: 3 hours per week
|
| |
-
AST 102 - Keyboarding II
(3 credits) Develops keyboarding and document production skills with emphasis on preparation of specialized business documents. Continues skill-building for speed and accuracy.
Prerequisite(s): AST 101 with “C” or better or departmental approval.
Lecture: 3 hours per week
|
| |
-
AST 107 - Editing/Proofreading Skills
(3 credits) Develops skills essential to creating and editing business documents. Covers grammar, spelling, diction, punctuation, capitalization, and other usage problems.
Prerequisite(s): ENF 1 or ENF 2 as demonstrated through the placement and diagnostics tests or equivalent.
Lecture: 3 hours per week
|
| |
-
AST 117 - Keyboarding for Computer Usage
(1 credit) Teaches the alphabetic keyboard and 10-key pad. Develops correct keying techniques.
Lecture: 1 hour per week
|
| |
|
| |
-
AST 230 - Introduction to Office Technology
(3 credits) Introduces principles, methods, and techniques involved in office technology. Emphasizes the use of microcomputer equipment and software.
Lecture: 3 hours per week
|
| |
-
AST 232 - Microcomputer Office Applications
(3 credits) Teaches production of business documents using word processing, databases, and spreadsheets. Emphasizes document production to meet business and industry standard.
Prerequisite(s): AST 102 and ITE 115 or departmental approval.
Lecture: 3 hours per week
|
| |
-
AST 234 - Records and Database Management
(3 credits) Teaches filing and records management procedures using microcomputer database software. Incorporates both manual and electronic methods for managing information.
Lecture: 3 hours per week
|
| |
-
AST 238 - Word Processing Advanced Operations
(3 credits) Teaches advanced word processing features including working with merge files, macros, and graphics; develops competence in the production of complex documents.
Prerequisite(s): AST 102 with “C” or better.
Lecture: 3 hours per week
|
| |
-
AST 242 - Medical Insurance and Coding
(3 credits) Teaches coding for medical services rendered within a medical office setting utilizing current coding books for maximum reimbursement.
Prerequisite(s): HLT 143 .
Lecture: 3 hours per week
|
| |
-
AST 243 - Office Administration I
(3 credits) Must be taken in sequence. Develops an understanding of the administrative support role and the skills necessary to provide organizational and technical support in a contemporary office setting. Emphasizes the development of critical-thinking, problem-solving, and job performance skills in a business office environment.
Prerequisite(s): AST 101 or departmental approval.
Lecture: 3 hours per week
|
| |
-
AST 244 - Office Administration II
(3 credits) Enhances skills necessary to provide organizational and technical support in a contemporary office setting. Emphasizes administrative and supervisory role of the office professional. Includes travel and meeting planning, office budgeting and financial procedures, international issues, and career development.
Prerequisite(s): AST 243 or equivalent.
Lecture: 3 hours per week
|
| |
-
AST 253 - Advanced Desktop Publishing Using Microsoft Publisher
(3 credits) Introduces specific desktop publishing software. Teaches document layout and design, fonts, type styles, style sheets, and graphics.
Prerequisite(s): AST 101 or ITE 115 or ITE 119 .
Lecture: 3 hours per week
|
| |
|
Air Conditioning and Refrigeration (AIR) |
| |
-
AIR 134 - Circuits and Controls I
(4 credits) Presents circuit diagrams for air conditioning units, reading and drawing of circuit diagrams, types of electrical controls. Includes analysis of air conditioning circuits, components, analysis and characteristics of circuits and controls, testing and servicing. Introduces electricity for air conditioning which includes circuit elements, direct current circuits and motors, single and three-phase circuits and motors, power distribution systems, and protective devices. Studies the electron and its behavior in passive and active circuits and components. Demonstrates electronic components and circuits as applied to air conditioning system.
Lecture: 3 hours
Lab: 3 hours
Total: 6 hours per week
|
| |
-
AIR 137 - Air Conditioning Electronics Survey
(2 credits) Studies electronics and its applications in the HVAC field. Covers computers, programmable controllers, and microprocessors in the HVAC industry.
Prerequisite(s): AIR 134 or departmental approval.
Lecture: 1 hour
Lab: 3 hours
Total: 4 hours per week
|
| |
-
AIR 154 - Heating Systems I
(3 credits) Introduces types of fuels and their characteristics of combustion; types, components and characteristics of burners, and burner efficiency analyzers. Studies forced air heating systems including troubleshooting, preventive maintenance and servicing.
Lecture: 2 hours
Lab: 2 hours
Total: 4 hours per week
|
| |
-
AIR 155 - Heating Systems II
(3 credits) Introduces types of fuels and their characteristics of combustion; types, components and characteristics of burners, and burner efficiency analyzers. Studies forced air heating systems including troubleshooting, preventive maintenance and servicing.
Lecture: 2 hours
Lab: 2 hours
Total: 4 hours per week
|
| |
-
AIR 156 - Heating Systems III
(3 credits) Introduces types of boilers, sizing boilers, sizing radiators and convectors, designing piping systems for steam, hot water and vacuum systems. Includes testing and servicing wet heat systems.
Lecture: 2 hours
Lab: 2 hours
Total: 4 hours per week
|
| |
-
AIR 158 - Mechanical Codes
(2 credits) Presents mechanical code requirements for installation, service, and inspection procedures. Uses the BOCA Code in preparation for the Master’s card.
Lecture: 2 hours per week
|
| |
-
AIR 165 - Air Conditioning Systems I
(3 credits) Introduces comfort survey, house construction, load calculations, types of distribution systems, and equipment selection. Introduces designing, layout, installing and adjusting of duct systems, job costs, and bidding of job. Part I of II.
Lecture: 2 hours
Lab: 3 hours
Total: 5 hours per week
|
| |
-
AIR 171 - Refrigeration I
(6 credits) Introduces basic principles of refrigeration. Includes refrigeration systems, cycles, and use and care of refrigeration tools. Studies shop techniques including soldering, brazing, leak testing, tube testing, tube bending, flaring, and swaging. Analyzes mechanical (vapor compression) systems. Assembles and repairs them including evacuating, charring, testing, and electrical repairs. Introduces advanced troubleshooting and repairs for domestic, commercial and industrial units. Includes medium, low, and ultra low temperature systems of the single and multiple unit types. Includes equipment selection, system balancing, and installation procedures.
Lecture: 4 hours
Lab: 6 hours
Total: 10 hours per week
|
| |
-
AIR 176 - Air Conditioning
(6 credits) Presents residential and commercial air conditioning systems, including air conditioning principles, psychometrics, and pressure balancing. Includes window units, residential central systems, small commercial (air- and water-cooled condensers) and automobile units.
Lecture: 4 hours
Lab: 4 hours
Total: 8 hours per week
|
| |
-
AIR 181 - Planning and Estimating I
(2 credits) Presents fundamentals of blueprint reading as applied to the building trades. Emphasizes air conditioning distribution, designing and drawing residential and commercial systems take-off of materials, and estimating the cost of the systems.
Lecture: 1 hour
Lab: 3 hours
Total: 4 hours per week
|
| |
-
AIR 210 - Air Conditioning and Refrigeration Analysis
(3 credits) Reviews principles of refrigeration and air conditioning. Studies components, types, and applications. Includes types of refrigeration systems such as multistage and cascade, selection and balancing of major components, and absorption systems.
Lecture: 2 hours
Lab: 3 hours
Total: 5 hours per week
|
| |
-
AIR 235 - Heat Pumps
(3 credits) Studies theory and operation of reverse cycle refrigeration including supplementary heat as applied to heat pump systems including service, installation, and maintenance.
Lecture: 2 hours
Lab: 2 hours
Total: 4 hours per week
|
| |
-
AIR 240 - Direct Digital Controls I (DDC I)
(3 credits) Studies the principles of direct digital controls. Presents common terms used within the HVAC control industry. Describes the function and operating characteristics of sensors, controllers, and final control devices. Describes transfer function for a control device and details the development of equations for typical control transfer functions.
Lecture: 2 hours
Lab: 2 hours
Total: 4 hours per week
|
| |
-
AIR 241 - Direct Digital Controls II (DDC II)
(3 credits) Studies electronics and its applications in the HVAC field. Covers computers, programmable controllers, and microprocessors in the HVAC industry. Describes the construction, operation, and installation of more commonly used HVAC sensors, controllers, and final control devices. Covers the selection of a controller based upon the process characteristics, calibration of a control loop for best efficiency. Describes how to develop flow charts.
Prerequisite(s): AIR 240 .
Lecture: 2 hours
Lab: 2 hours
Total: 4 hours per week
|
| |
|
Arts (ART) |
| |
-
ART 101 - History and Appreciation of Art I
(3 credits) Recommended to be taken in sequence. Presents the history and interpretation of architecture, sculpture, and painting. Begins with prehistoric art and follows the development of western civilization to the present. Passport Course
Prerequisite(s): ENF 1 or ENF 2 as demonstrated through the placement and diagnostics tests or equivalent.
Lecture: 3 hours per week
|
| |
-
ART 102 - History and Appreciation of Art II
(3 credits) Recommended to be taken in sequence. Presents the history and interpretation of architecture, sculpture, and painting. Begins with prehistoric art and follows the development of western civilization to the present. Passport Course
Prerequisite(s): ENF 1 or ENF 2 as demonstrated through the placement and diagnostics tests or equivalent.
Lecture: 3 hours per week
|
| |
-
ART 106 - History of Modern Art
(3 credits) Surveys the history of modern architecture, sculpture, painting, and graphic arts in representational and non-representational forms. Focuses on the periods and movements that influenced the arts of the twentieth century. Emphasizes contemporary art forms, particularly the interaction between art and society, industry, and design.
Lecture: 3 hours per week
|
| |
-
ART 121 - Drawing I
(3 credits) Must be taken in sequence. Develops basic drawing skills and understanding of visual language through studio instruction/lecture. Introduces concepts such as proportion, space, perspective, tone and composition as applied to still life, landscape, and the figure. Uses drawing media such as pencil, charcoal, ink wash, and color media. Includes field trips and gallery assignments as appropriate. The cost of drawing supplies is estimated to be $125 per semester.
Lecture: 1 hour
Studio Instruction: 4 hours
Total: 5 hours per week
|
| |
-
ART 122 - Drawing II
(3 credits) Must be taken in sequence. Develops basic drawing skills and understanding of visual language through studio instruction/lecture. Introduces concepts such as proportion, space, perspective, tone and composition as applied to still life, landscape, and the figure. Uses drawing media such as pencil, charcoal, ink wash, and color media. Includes field trips and gallery assignments as appropriate. The cost of drawing supplies is estimated to be $125 per semester.
Lecture: 1 hour
Studio Instruction: 4 hours
Total: 5 hours per week
|
| |
-
ART 131 - Fundamentals of Design I
(3 credits) Must be taken in sequence. Explores the concepts of two-and three-dimensional design and color. May include field trips as required. There will be an approximate cost of $150 the first semester for supplies.
Lecture: 1 hour
Studio Instruction: 4 hours
Total: 5 hours per week
|
| |
-
ART 132 - Fundamentals of Design II
(3 credits) Must be taken in sequence. Explores the concepts of two-and three-dimensional design and color. May include field trips as required. There will be an approximate cost of $150 the first semester for supplies.
Lecture: 1 hour
Studio Instruction: 4 hours
Total: 5 hours per week
|
| |
-
ART 138 - Figure Drawing
(3 credits) Develops drawing skills for the beginning and experienced students. Explores a broad range of drawing problems dealing with the human figure in costume using various media and techniques.
Prerequisite(s): ART 121 or division approval Corequisite(s): ART 122 or division approval
Lecture: 2 hours
Studio Instruction: 3 hours
Total: 5 hours per week
|
| |
-
ART 141 - Typography I
(3 credits) Studies the history of letter forms and typefaces and examines their uses in contemporary communication media. Emphasizes applications to specific design problems. Includes identification and specification of type, copy fitting and hands-on typesetting problems.
Lecture: 2 hours
Studio Instruction: 3 hours
Total: 5 hours per week
|
| |
-
ART 150 - History of Film and Animation
(3 credits) Exposes the student to the rich history of temporal imagery from the invention of the zoetrope and kinetoscope through the rise of the moving picture industry and the development of the first animated films to present day television. Chronicles the impact of the moving image in the twentieth century. Discusses the design and concept of influential works as well as the relationship between these earlier forms of moving graphics and today’s innovative video technology.
Lecture: 3 hours per week
|
| |
|
| |
-
ART 208 - Video Techniques
(4 credits) (Substitutes for PHT 126). Addresses the fundamentals of video technology as applied to the creation of multimedia projects. Focuses on the aesthetics of editing. Extends the capabilities of graphic designers and artists and allows them to transfer artwork and animation from the computer to video, and to capture video frames for use in multimedia design on the computer. Instructs students in the development of sophisticated typographic design.
Prerequisite(s): ENF 1 or ENF 2 as demonstrated through the placement and diagnostics tests or equivalent.
Lecture: 2 hours
Lab: 4 hours
Total: 6 hours per week
|
| |
-
ART 210 - Advanced Video Techniques
(3 credits) Explores advanced production and post-production techniques utilizing the audio and video capabilities of Hybrid Digital Single Lens Reflex (HDSLR) cameras that include the following: sound design, title design, color correction, compelling visual narratives, complex compositing and basic motion effects. Covers practical video projects common for commercial photographers and designers, including corporate identity videos, event videos and advanced storytelling. This course is cross‐listed with PHT 210. Credit will not be awarded for both.
Prerequisite(s): ART 208 and PHT 164
Lecture: 2 hours
Lab: 3 hours
Total: 5 hours per week
|
| |
-
ART 214 - Advanced Video Project Development
(3 credits) Applies video pre-production, production and post-production skills in the creation of unique, client-approved videos from concept to completion. Develops skills of various video crew positions, collaboration skills, and communication skills and creation of narrative, documentary, educational, and commercial video products as part of a portfolio. This course is cross-listed with PHT 214. Credit will not be awarded for both.
Corequisite(s): ART 210
Lecture: 2 hours
Lab: 3 hours
Total: 5 hours per week
|
| |
-
ART 221 - Drawing III
(3 credits) Must be taken in sequence. Introduces advanced concepts and techniques of drawing as applied to the figure, still life, and landscape. Gives additional instruction in composition, modeling, space, and perspective. Encourages individual approaches to drawing. The cost of drawing supplies is estimated to be $85 per semester.
Prerequisite(s): ART 122 .
Lecture: 1 hour
Studio Instruction: 4 hours
Total: 5 hours per week
|
| |
-
ART 222 - Drawing IV
(3 credits) Must be taken in sequence. Introduces advanced concepts and techniques of drawing as applied to the figure, still life, and landscape. Gives additional instruction in composition, modeling, space, and perspective. Encourages individual approaches to drawing. The cost of drawing supplies is estimated to be $85 per semester.
Prerequisite(s): ART 221
Lecture: 1 hour
Studio Instruction: 4 hours
Total: 5 hours per week
|
| |
-
ART 228 - Multimedia Graphic Design I
(4 credits) Must be taken in sequence. Introduces concepts of graphic design specific to multimedia interactivity. Incorporates design methodology in preparation and implementation of flowcharts and storyboards. Includes studio projects exploring the functionality, look and feel of multimedia presentations for CD-ROM, the Internet, and games. Implements hardware, software and production techniques required for multimedia development. Includes basic animation principles, sound and the option to include video.
Prerequisite(s): ART 121 , ART 131 , ART 208 .
Lecture: 2 hours
Lab: 4 hours
Total: 6 hours per week
When Offered ART 228 is offered in the fall only.
|
| |
-
ART 229 - Multimedia Graphic Design II
(4 credits) Must be taken in sequence. Introduces concepts of graphic design specific to multimedia interactivity. Incorporates design methodology in preparation and implementation of flowcharts and storyboards. Includes studio projects exploring the functionality, look and feel of multimedia presentations for CD-ROM, the Internet, and games. Implements hardware, software and production techniques required for multimedia development. Includes basic animation principles, sound and the option to include video.
Prerequisite(s): ART 228 and ART 141 .
Lecture: 2 hours
Lab: 4 hours
Total: 6 hours per week
When Offered ART 229 is offered in the spring only.
|
| |
-
ART 241 - Painting I
(3 credits) Must be taken in sequence. Introduces abstract and representational painting in acrylic and/or oil with emphasis on color composition and value. The initial investment for painting supplies is approximately $150, with supplementary expenses in the following semester.
Prerequisite(s): ART 121 or divisional approval.
Lecture: 1 hour
Studio Instruction: 4 hours
Total: 5 hours per week
|
| |
-
ART 242 - Painting II
(3 credits) Must be taken in sequence. Introduces abstract and representational painting in acrylic and/or oil with emphasis on color composition and value. The initial investment for painting supplies is approximately $150, with supplementary expenses in the following semester.
Prerequisite(s): ART 241 or divisional approval.
Lecture: 1 hour
Studio Instruction: 4 hours
Total: 5 hours per week
|
| |
-
ART 250 - History of Design
(3 credits) Surveys the development of graphic design and illustration with emphasis on the 19th and 20th centuries. Analyzes the work of outstanding designers and illustrators.
Lecture: 3 hours per week
|
| |
-
ART 251 - Communication Design I
(3 credits) Must be taken in sequence. Studies the principles of visual communications as applied to advertising in newspapers, magazines, direct mail advertising, house organs, etc. Analyzes the influence of contemporary art on design. Finished work is produced on the computer.
Prerequisite(s): (ART 283 or PHT 135 ), ART 141 , ART 131 .
Lecture: 2 hours
Studio Instruction: 3 hours
Total: 5 hours per week
|
| |
-
ART 263 - Interactive Design I
(3 credits) Focuses on creative concepts of design problem solving for interactive design: techniques specific to web, multimedia for the web, and other interactive design products. Advanced interactive design functions such as animation, rollovers, and audio are covered in ART 264 .
Prerequisite(s): ART 131 , ART 141 , ART 208 , ART 283 .
Lecture: 2 hours
Lab: 3 hours
Total: 5 hours per week
When Offered ART 263 is offered in the fall only.
|
| |
-
ART 264 - Interactive Design II
(3 credits) Focuses on creative concepts of design problem solving for interactive design: techniques specific to web, multimedia for the web, and other interactive design products. Advanced interactive design functions such as animation, rollovers, and audio are covered in ART 264.
Prerequisite(s): ART 263 .
Lecture: 2 hours
Lab: 3 hours
Total: 5 hours per week
When Offered ART 264 is offered in the spring only.
|
| |
-
ART 271 - Printmaking I
(3 credits) Introduces the student to the full range of printmaking techniques. Includes woodcut, silkscreen, etching, and lithography. Provides historical perspective on printmaking. Part I of II.
Prerequisite(s): ART 121 or division approval Corequisite(s): ART 131 or division approval
Lecture: 2 hours
Studio Instruction: 3 hours
Total: 5 hours per week
|
| |
-
ART 280 - Graphic Design for Studio Arts
(3 credits) Introduces digital tools, software, and techniques used by visual artists and design professionals to create day-to-day business forms, documents and self-promotional material. Explores the fundamental principles of layout and design that govern the use of image, type and color. Presents professional standards and practices used for organizing, archiving, printing and presenting their work.
Prerequisite(s): ART 131 , PHT 164 or instructor permission.
Lecture: 2 hours
Lab: 3 hours
Total: 5 hours per week
When Offered ART 280 is offered in spring only.
|
| |
-
ART 283 - Computer Graphics I
(3 credits) Utilizes microcomputers and software to produce computer graphics. Employs techniques learned to solve studio projects which reinforce instruction and are appropriate for portfolio use.
Prerequisite(s): ENF 1 or ENF 2 as demonstrated through the placement and diagnostics tests or equivalent.
Lecture: 2 hours
Studio Instruction: 3 hours
Total: 5 hours per week
|
| |
-
ART 287 - Portfolio and Resume Preparation
(3 credit) Focuses on portfolio preparation, resume writing, and job interviewing for students. Recommended for students in the final semester of their programs.
Prerequisite(s): Vary by program of study. See advisor. Permission of instructor required.
Lecture: 1 hour
Studio Instruction: 4 hours
Total: 5 hours per week
|
| |
|
| |
-
ART 291 - Computerized Graphic Design I
(3 credits) Must be taken in sequence. Introduces students to using the computer as a publishing system. Examines stages of a publication from typesetting, laying out, creating and digitizing of illustrations and photographs, to the final printing. Requires students to write, design, illustrate and print pamphlets on the computer, including one full-color publication.
Prerequisite(s): ART 121 , ART 131 , ART 141 , and ART 283 or PHT 135 .
Lecture: 2 hours
Studio Instruction: 3 hours
Total: 5 hours per week
|
| |
-
ART 292 - Computerized Graphic Design II
(3 credits) Must be taken in sequence. Introduces students to using the computer as a publishing system. Examines stages of a publication from typesetting, laying out, creating and digitizing of illustrations and photographs, to the final printing. Requires students to write, design, illustrate and print pamphlets on the computer, including one full-color publication.
Prerequisite(s): ART 291
Lecture: 2 hours
Studio Instruction: 3 hours
Total: 5 hours per week
|
| |
|
Automotive (AUT) |
| |
-
AUT 101 - Introduction to Automotive Systems
(3 credits) Introduces fundamental systems of automobile, the engine fuel, exhaust, electric, ignition, lubrication, cooling, transmission, steering, brake and suspension systems. Teaches theory and function of each system. Demonstrates operation.
Lecture: 2 hours
Lab: 2 hours
Total: 4 hours per week
|
| |
-
AUT 111 - Automotive Engines I
(4 credits) Presents analysis of power, cylinder condition, valves, and bearings in the automotive engine to establish the present condition, repairs, or adjustments.
Prerequisite(s): AUT 101 .
Lecture: 3 hours
Lab: 3 hours
Total: 6 hours per week
|
| |
-
AUT 125 - Anti-Pollution Systems
(3 credits) Studies various anti-pollution systems used on modern automobiles, installation, inspection, repair and service.
Lecture: 2 hours
Lab: 3 hours
Total: 5 hours per week
|
| |
-
AUT 126 - Auto Fuel and Ignition Systems
(5 credits) Studies automobile ignition and fuel systems, their functions in operation of engine. Includes carburetors, fuel pumps, ignition systems, troubleshooting, engine test and adjustment, and tune-up.
Lecture: 4 hours
Lab: 3 hours
Total: 7 hours per week
|
| |
-
AUT 141 - Auto Power Trains I
(4 credits) Presents operation, design, construction, and repair of power train components, standard, and automatic transmission. Includes clutches, propeller shaft, universal joints, rear axle assemblies, fluid couplings, torque converters as well as 2, 3, and 4-speed standard, overdrive, and automatic transmissions.
Lecture: 3 hours
Lab: 3 hours
Total: 6 hours per week
|
| |
-
AUT 211 - Automotive Systems III
(4 credits) Presents advanced theory and detailed study of automobile systems. Provides laboratory periods for actual field practice in troubleshooting.
Lecture: 3 hours
Lab: 3 hours
Total: 6 hours per week
|
| |
-
AUT 230 - Introduction to Alternative Fuels and Hybrid Vehicles
(3 credits) Introduces current trends in alternative fueled vehicles including current alternative fueled vehicles and the implication and safety precautions necessary for working on hybrid vehicles systems.
Prerequisite(s): AUT 245 or hold current ASE A6 certification.
Lecture: 3 hours per week
|
| |
-
AUT 236 - Automotive Climate Control
(4 credits) Introduces principles of refrigeration, air conditioning controls and adjustment, and general servicing of automotive air conditioning systems.
Lecture: 3 hours
Lab: 3 hours
Total: 6 hours per week
|
| |
-
AUT 242 - Automotive Electricity II
(4 credits) Introduces electricity and magnetism, symbols, and circuitry as applied to alternators, regulators, starters, lighting systems, instruments, gauges and accessories.
Lecture: 3 hours
Lab: 3 hours
Total: 6 hours per week
|
| |
Page: 1
| 2
| 3
| 4
| 5
| 6
| 7
| 8
| 9
|
Print this Page